The sitar English pronunciation: /ˈsɪtɑr/ or /sɪˈtɑr/ is a plucked stringed instrument used mainly in Hindustani music and Indian classical music. The instrument is believed to have been derived from the veena, an ancient Indian instrument, which was modified by a Mughal court musician to conform with the tastes of his Persian patrons and named after a Persian instrument called the Setar (meaning “three strings”). The sitar flourished in the 16th and 17th centuries and arrived at its present form in 18th century India. It derives its distinctive timbre and resonance from sympathetic strings, bridge design, a long hollow neck and a gourd resonating chamber.In appearance, the Sitar is similar to the Tambura, except it has frets. The body of Sitar is more or less a spherical gourd at the lower end.

Used widely throughout the Indian subcontinent, the sitar became popularly known in the wider world through the work of Ravi Shankar beginning in the late 1950s and early 1960s. The sitar saw further use in popular music after the Beatles featured the sitar in their compositions “Norwegian Wood (This Bird Has Flown)”, “Within You Without You”, “Tomorrow Never Knows” and “Love You To”. Their use of the instrument came as a result of George Harrison’s taking lessons on how to play it from Shankar and Shambhu Das. Brian Jones of the Rolling Stones also used a sitar in “Paint It Black” and a brief fad began for using the instrument in pop songs.

How to play Sitar?


How to make Sitar?


Etymology and history

The Hindi and Urdu word sitar originally derives from Persian seh + tar, literally meaning “three strings.”The instrument descended from a similar but simpler Afghan instrument called the Setar (meaning “three strings”) and its predecessor the Dutar (meaning “two strings”) The sitar flourished in the 16th and 17th centuries and arrived at its present form in 18th century India, gaining prominence in the royal court of the Mughal Empire based in Northern India.

In his Bharatiya Sangeet Vadya Dr. Lalmani Misra traces the instrument’s development from the Tritantri veena through the nibaddh and anibaddh Tamburas also called tanbur and later the jantra. Construction of the similar tanpura was described by Tansen

General layout



A sitar can have 18, 19 or 20 strings. Six or seven of these are played strings which run over curved, raised frets, and the remainder are sympathetic strings (tarb, also known as taarif or tarafdaar) which run underneath the frets and resonate in sympathy with the played strings. The frets are movable, allowing fine tuning. The played strings run to tuning pegs on or near the head of the instrument, while the sympathetic strings, which are a variety of different lengths, pass through small holes in the fretboard to engage with the smaller tuning pegs that run down the instrument’s neck.

The Gandhaar-pancham sitar (used by Vilayat Khan and his disciples) has six playable strings, whereas the Kharaj-pancham sitar, used in the Maihar gharana, to which Ravi Shankar belongs, and other gharanas such as Bishnupur, has seven. Three of these (or four on a Ghandar-pancham sitar or “Vilayat Khan”-style aka Etawa gharana), called the chikaari, simply provide a drone; the rest are used to play the melody, though the first string (baajtaar) is most used.

The instrument has two bridges: the large bridge (badaa goraa) for the playing and drone strings and the small bridge (chota goraa) for the sympathetic strings. Its timbre results from the way the strings interact with the wide, sloping bridge. As a string reverberates its length changes slightly as its edge touches the bridge, promoting the creation of overtones and giving the sound its distinctive tone. The maintenance of this specific tone by shaping the bridge is called jawari. Many musicians rely on instrument makers to adjust this.

The bridges are fixed to the main resonating chamber, or kaddu, at the base of the instrument. Some sitars have a secondary resonator, the tumbaa, near the top of the hollow neck.

Materials used in construction include teak wood or tun wood (Cedrela toona), which is a variation of mahogany, for the neck and faceplate (tabli), and gourds for the resonating chambers. The instrument’s bridges are made of deer horn, ebony, or very occasionally from camel bone. Synthetic material is now common as well.

Construction styles

There are three popular modern styles of sitar offered in a variety of sub-styles and decorative patterns. The two popular styles are the “gayaki style” sitars (sometimes called “Vilayat Khan style sitars”) and the full decorated “instrumental style” sitars (sometimes called “Ravi Shankar style sitars”). The gayaki style sitar is mostly of seasoned toon wood, with very few or no carved decorations. It often has a dark polish. The inlay decorations are mostly of mother of pearl (imitation). The number of sympathetic strings is often limited to eleven but may extend to thirteen. Jawari (bridge) grinding styles are also different, as is the thickness of the “tabli” (soundboard).

Close-up of the red and white engraved celluloid decoration on a toon wood “Ravi Shankar style” sitar
The other type of sitar, the instrumental style, is most often made of seasoned toon wood, but sometimes made of (Burma) teak. It is often fitted with a second resonator, a small tumba (pumpkin or pumpkin-like wood replica) on the neck. This style is usually fully decorated, with floral or grape carvings and celluloid inlays with colored (often brown or red) and black floral or arabesque patterns. It typically has thirteen sympathetic strings. It is said that the best Burma teak sitars are made from teak that has been seasoned for generations. Therefore instrument builders look for old Burma teak that was used in old colonial-style villas as whole trunk columns for their special sitar constructions. The sources of very old seasoned wood are a highly guarded trade secret and sometimes a mystery.

Preferences of taraf string & peg positioning and their total number
There are various additional sub styles and cross mixes of styles in sitars, according to customer preferences. Most importantly, there are some differences in preferences for the positioning of sympathetic (taraf) string pegs (see photo).
Amongst all sitar styles there are student styles, beginner models, semi-pro styles, pro-models, master models, and so on. Prices are often determined by the manufacturer’s name and not by looks alone or materials used. Some sitars by certain manufacturers fetch very high collectible prices. Most notable are older Rikhi Ram (Delhi) and older Hiren Roy (Kolkata) sitars depending upon which master built the instrument.

Though not technically a sitar, the electric sitar is a guitar with a special bridge, known as the “buzz bridge”, and sympathetic strings, to mimic the sitar. It has 6 strings, and lacks movable frets.


Tuning depends on the sitarist’s school or style, tradition and each artist’s personal preference. The main playing string is almost invariably tuned a perfect fourth above the tonic, the second string being tuned to the tonic. The tonic in the Indian solfège system is referred to as ṣaḍja, ṣaḍaj, or the shortened form sa, or khaṛaj, a dialectal variant of ṣaḍaj, not as vād, and the perfect fifth to which one or more of the drones strings are tuned is referred to as pañcam, not samvād.

The sympathetic strings are tuned to the notes of the raga being played: although there is slight stylistic variance as to the order of these, typically they are tuned:

I Sa= t
VII Ni= C#
I Sa= D
II Re= E
III Ga= F#
IV Ma= G
V Pa= A
VI Dha= B
I Sa= D
II Re= E
III Ga= F#
(the last three in the upper octave). The player should re-tune for each raga. Strings are tuned by tuning pegs, and the main playing strings can be fine-tuned by sliding a bead threaded on each string just below the bridge.

In one or more of the more common tunings (used by Ravi Shankar, among others, called “Kharaj Pancham” sitar) the playable strings are strung in this fashion:

1.Chikari strings: Sa (high), Sa (middle), and Pa.
2.Kharaj (bass) strings: Sa (low) and Pa (low).
3.Jod and baaj strings, Sa and Ma.

In a “Gandhar Pancham” (Imdadkhani, school of Vilayat Khan) sitar, the bass or kharaj strings are removed and are replaced by a fourth chikari which is tuned to Ga. By playing the chikari strings with this tuning, one produces a chord (Sa, Sa, Pa, Ga or Sa Sa Ma Ga or Sa, Sa, Dha, Gha depending on the raga).

To tune the sympathetic strings to raga Kafi for example: I Sa, vii ni (lower case denotes flat (komal) I Sa, II Re, iii ga, III Ga (Shuddh or natural, in Kafi the third is different ascending and descending), iv ma, V Pa, VI Dha, vii ni, I Sa, II Re, iii ga.

There is a lot of stylistic variance within these tunings and like most Indian stringed instruments, there is no default tuning. Mostly, tunings vary by schools of teaching (gharana) and the piece that is meant to be played.


A sitar workshop in Islamabad, Pakistan.
The instrument is balanced between the player’s left foot and right knee. The hands move freely without having to carry any of the instrument’s weight. The player plucks the string using a metallic pick or plectrum called a mizraab. The thumb stays anchored on the top of the fretboard just above the main gourd. Generally only the index and middle fingers are used for fingering although a few players occasionally use the third. A specialized technique called “meend” involves pulling the main melody string down over the bottom portion of the sitar’s curved frets, with which the sitarist can achieve a seven semitone range of microtonal notes (it should be noted, however, that because of the sitar’s movable frets, sometimes a fret may be set to a microtone already, and no bending would be required). Adept players bring in charisma through use of special techniques like Kan, Krintan, Murki, Zamzama etc. They also use special Mizrab Bol-s, as in Misrabani and create Chhand-s even in odd-numbered Tal-s like Jhoomra.

World music influence

The Sitar Maestro Vilayat Khan had been touring outside India off and on for more than 50 years, and was the first Indian musician to play in England after independence (1951) and to introduce the sitar to world audiences. Then in the late 1950s and early 1960s Ravi Shankar along with his musical partner on Tabla Alla Rakha began a further introduction of Indian classical music to the West.

The Kinks’ top 10 single “See My Friends” featured a low tuned drone guitar which was widely mistaken to be the instrument.

The sitar saw further use in popular music after the Beatles featured the sitar in their compositions “Norwegian Wood (This Bird Has Flown)”, “Within You Without You” and “Love You To”. Their use of the instrument came as a result of George Harrison’s taking lessons on how to play it from Shankar and Shambhu Das.Brian Jones of the Rolling Stones also used a sitar in “Paint It Black” and a brief fad began for using the instrument in pop songs.

Led Zeppelin’s Jimmy Page talked about his love of Indian music, saying “lets put it this way; I had a sitar before George Harrison … I went to India after I came back from a tour with the Yardbirds, I had been listening to Indian music for quite a while and wanted to hear it first hand”. The East Indian scales used on the track “Friends” (Led Zep III) “Kashmir” (Physical Graffiti) are considered[by whom?] fine examples of the influence of the sitar in rock music. The Doors extensively used Indian and near eastern scales in their psychedelic soundscapes.Robbie Krieger’s guitar playing in The End is saturated in sitar melodic influence. Fleetwood Mac’s Gold Dust Woman features the instrument, as well. Many pop performances actually involve the Electric Sitar, a solid body guitar-like instrument quite different from the traditional acoustic Indian instrument.

Psychedelic music bands often used new recording techniques and effects and drew on non-Western sources such as the ragas and drones of Indian music. The Electric Prunes appeared in early ads for the Vox Wah wah pedal, which touted the effect’s ability to make an electric guitar sound like a sitar.Psychedelic influences spread into folk, rock, and soul, creating the subgenres of psychedelic folk, psychedelic rock, psychedelic pop and psychedelic soul in the late 1960s before declining in the early 1970s. Psychedelic music bands expanded their musical horizons, and went on to create and/or influence many new musical genres including progressive rock, kosmische musik, synth rock, jazz rock, heavy metal, glam rock, funk, electro and bubblegum pop. Psychedelic music was revived in a variety of forms of neopsychedelia from the 1980s onwards, and re-emerged in electronic music in genres including acid house, trance music (particularly psychedelic trance) and new rave.